Latest OpenWRT with FlashSYS v2 for OpenRB hardware

Latest revision on FlashSYS v2 GUI for OpenWRT with all essential packages for OpenRB hardware is up for download: openwrt-openrb-squashfs.img

FlashSYS v2 SVN version is now available

We are proud to announce that you can download and test FlashSYS v2 from our SVN at http://dev.flashsys.org:8000/

FlashSYS v1 is there aswell for evaluation purposes.

Preview version image for x86 (PC), IXP4xx and PowerPC published

We have decided not to wait for OpenWRT 8.08 RC to come out and post the x86 version now. This is a 100% working preview release based on OpenWRT trunk with our modifications and FlashSYS v1 web GUI. Because we are using 2.6 kernel, Broadcom based routers which require 2.4 kernel are not supported in this version.

This release comes with wireless drivers for Atheros based on Public HAL. We were unable to include extra channel modes (superchannel) and high power modes (>20db) because of license agreements.

Image downloads

x86 (PC) with jffs2 filesystem: http://openrb.com/flashsys/flashsys-x86-jffs2-128k.image

PowerPC (MagicBox) with squashfs filesystem: http://openrb.com/flashsys/flashsys-magicbox-squashfs.img

IXP4xx image with squashfs filesystem: http://openrb.com/flashsys/flashsys-ixp4xx-squashfs.img

Generic kernel for IXP4xx: http://openrb.com/flashsys/flashsys-ixp4xx-zImage

Avila kernel for IXP4xx: http://openrb.com/flashsys/flashsys-avila-zImage

Wrt300nv2 kernel for IXP4xx: http://openrb.com/flashsys/flashsys-wrt300nv2-zImage

Installation on x86

Windows: you can use physdiskwrite from http://m0n0.ch/wall/physdiskwrite.php to write the image

Linux: from the directory where the image is run this command (assuming /dev/sdb is the your image device)
dd if=flashsys-x86-jffs2-128k.image of=/dev/sdb

Installation on other platforms

Please refer to OpenWRT documentation on installation guides

Documentation

Combined documentation (FlashSYS GUI and OperRB PPC platform) can be downloaded here: http://openrb.com/flashsys/OpenRB405_manual_GUI_manual.pdf
Note: FlashSYS GUI starts from page 22

Default settings

SSH login: user: root , password: admin

Web GUI login: user: admin , password: admin

eth0 IP: 192.168.0.10

Wireless settings: 2.4g, AP mode, WEP key: 1111111111

System screenshots (FlashSYS v1)

Click on picture to enlarge

Hardware interfaces and statistics

Advanced QoS settings

Hardware interface info and packages

Firewall, NAT and monitoring

Wireless configuration